3/4″ PENETRATOR DRILL BIT FOR CONCRETE AND STEEL/REBAR
THE NEW SDS PLUS PENETRATOR – Quad Carbide Tipped
Use the drop down menu to select Length!
Drills concrete and steel decking, rebar at the same time.
The Penetrator allows uninterrupted drilling through concrete and steel…
Solid Cross Configuration for insane performance. Laser welded micro-grain carbide embedment with flank side reinforcements.
Generous hi helix spiral flute entrance geometry for fast dust evacuation.
Vacuum blow back prevention through sub-trac spiral flute design.
New low noise reduction design. Significantly reduced ” arm-hand vibration” due to multi-cutter head design.
Unsurpassed drilling performance is concrete and stone and yes, reinforced rebar and steel decking.
Assure safe footing and all safety measures before attempting to use power drill.
Use SDS-Plus rotary hammer in hammer drill mode. When encountering rebar/steel apply firm steady pressure.
Made in Germany.
OAL: Overall Length | LOC: Length of Cut
| 3/4″ x 5-1/4″ LOC x 8″ OAL Penetrator SDS-PLUS | RD-027047 |
| 3/4″ x 7-1/4″ LOC x 10″ OAL Penetrator SDS-PLUS | RD-027035 |
| 3/4″ x 9-1/4″ LOC x 12″ OAL Penetrator SDS-PLUS | RD-027043 |
| 3/4″ x 15-1/4″ LOC x 18″ OAL Penetrator SDS-PLUS | RD-027056 |
Questions? Call us at 1-800-350-TOOL (8665)
